Parts & Accessories

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).

Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Easy-to-install foot for Thule Evo roof racks. For vehicles with raised railings. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle. - Rubber lining protects the surface of the raised railings and ensures a perfect fit. - Secures to the vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer’s Guide to find out which roof rack fits your car

Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily by placing under hood or trunk and is secured by the closed lid - Boat bow & stern tie-down loops that are fastened inside the vehicle hood or trunk hatch and protrude out through the edge to provide a secure loop to attach tie-downs to

18" or 24" split bottom surf rack pads fit Thule square bars and other square/round bars or Thule's AeroBlade bars, Xsporter bars, and most factory racks. - High density foam padding provides maximum surfboard or stand-up paddle board protection - No-fade UV resistant fabrics for long term durability - Sewn-in hook and loop straps and convenient bungee cinch-cord ends allow for fast and easy installation, removal and adjustment (tie-down straps sold separately)

- Pack includes 2 wheels straps and 2 road adaptors - The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

- Telescoping design and protective loop allows different geometry bikes (i.e. women's and bmx bikes) to ride on hitch or strap rack arms - Adjust length (31" maximum) - For use on 1 bike

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Rear wheel strap for Boa bike mount. Includes one strap.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Hardcore adventurers like keeping things safe on the road. EXO LitKit ensures you are street-legal when using the Yakima EXO System. Simply attach to the EXO SwingBase arms to keep your license plate and taillights visible, no matter your configuration. - Keeps your lights and license plate visible while on the road - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Tool-less install onto the EXO SwingBase arms - Attachment points allow EXO LitKit to rotate down and out of the way to easily switch between EXO Accessories - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - 2 Year Warranty - Not intended to remain installed when Swing plate arms are closed - For EXO SwingBase only Product Specs: - Weight: 5.00 lbs. - Dimensions: L 24.50 in x W 50.00 in x H 10.00 in - Limited Two Year Warranty

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in