Filter By:

Nordic Accessories

Swix DHF104 Marathon - 40g
$75.00 $100.00 25% Off
For lengthy events like 30- and 50-kilometer races, Swix DHF104 Marathon Glidewax will keep your skis fast for the long haul. Harder and more durable than traditional high fluoro waxes, yet ready to handle wet and new snow, this Nordic ski wax can keep you gliding fast and strong from start to finish. If you have a grueling test of endurance like the Birkie on your schedule, consider DHF104 Marathon Glidewax from Swix. Harder formula is more durable for longer events over 10K Suitable for clean, wet, new snow
Swix HF10BWX Black Wolf - 40g
$75.00 $100.00 25% Off
High fluoro glide wax 0°C to +10°C, For wet fresh,old or man made snow, Additive that reduces friction in dirty snow Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp: A new wax for the Cera Nova X line made harder than the old HF10BW. The BW solid lubricant additive reduces the friction in contaminated snow. The adjusted hardness makes the wax more durable and absorbs less dirt. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10BWX can be used as a race wax alone, but is often used as a base for Cera F, such as FC10X and HVC Warm (FC80L)
Swix HF10X YELLOW
$75.00 $100.00 25% Off
High fluoro glide wax 0°C to +10°C, For wet fresh old or man-made snow, Good in clean snow, Easy to apply. Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp: 120°C (248°F). A new wax in for the Cera Nova X line made a little bit harder than the old HF10. Our test result shows that a slightly harder wax performs better in this area compared to the old classic, especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be reheated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10X can be used as a race wax alone but is often used as a base for Cera F, such as FC10X and HVC Warm (FC80L).
Swix HF4X Green - 40g
$75.00 $100.00 25% Off
A new cold wax with nano technology specially developed for dry friction conditions. The advantage of fluor in these temperatures is most present when the air humidity is high, meaning above 80 %. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF04X can be used as a race wax alone or as a base for Cera F powder, such as FC04X Snow Temp: -12°C to -32°C (10°F to -25°F). Iron Temp: 155°C (311°F).
Swix HF5BWX BLACK WOLF
$75.00 $100.00 25% Off
High fluoro glide wax -8°C to -14°C. For cold snow. For fresh, old or man-made snow. With additive that reduces dry friction. Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp: 150°C (311°F). The 5 series is brand new for the Cera Nova X line, and fulfill a hardness gap between the 4 and the 6 series. It was a demand from alpine and has been used with great success in World Cup over the last two seasons. Cross country is also discovering HF05BWX with great interest. The lower melting point compared to the 4 series makes it easier to work with, without sacrificing the good glide properties in cold conditions. HF05BWX is a new special wax with BW solid lubricant additive that reduces friction when very cold snow and dry friction conditions. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. HF05BWX can be used as a race wax alone or as a base for Cera F powder.
Swix LF3X COLD POWDER
$75.00 $100.00 25% Off
Powder wax for cold conditions, Suits conditions from -12ºC to -32ºC, For touring and racing skiers, Great for training and competition -10ºC to -32ºC (14ºF to -25ºF). A very hard powder wax having a high content of fluorocarbon material. Used when the snow is very fine-grained and very cold. Easy to iron and scrape. Also helps to reduce base abrasion on cold, aggressive snow. Recommended iron temperature setting of 150-155ºC.
Page 1 of 1