Boardworks offers our SUP Leash to keep SUP surfing safe and maximize your wave count. Features: Double swivels Easy release padded cuffs (1 1/2? cuff for ankle and 2? wide for calf leash) Triple velcro wrap rail saver Durable 5/16” diameter urethane cord Overmolded leash ends for extra strength
Boardworks offers the best padded board bags for protecting your Stand Up Paddleboards. Features: White nylon shell on the top U/V reflecting nylon shell on the bottom Sidewall for rail protection, thicker boards, and a great fit 5mm padding Padded shoulder strap Handle webbing at nose and tail and mid rail Zipper around tail for easy entry Fin slot and finger well access with velcro closures Built in ventilation patches on rails, nose and tail Dimensions: Available in 12’6? and 14’0? Full, wide design to accept a wide range of touring and racing SUPs up to 32” wide and 7” thick
Boardworks is excited to offer 2 sizes of new coolers designed for Stand Up Paddleboards, and of course, all types of other uses. The “Chill Station” coolers are an affordable alternative to high priced, high end coolers, while having similar design features. Our Chill Station Coolers are made of roto-molded plastic with interior foam injected between sidewalls for optimum durability and insulation. Great for use as a seat option behind the paddling area when paddling from a seated position, landing fish, dealing with tackle, or just chilling out and taking it all in! Features: Thick roto-molded plastic inner and outer shell for maximum durability Environmental LLDPE material, food grade, non-toxic, UV resistant Injected with interior foam for superior insulation Heavy duty rubber latch straps Rubber anti-slip feet Side carry handles with slots for attaching to deck or floor Large plastic drain plug with rubber O-Ring EVA pad on lid for comfort and non slip Can be drilled into for adding a variety of mounts Dimensions: 2 Sizes | 28 Liter & 38 Liter 28 Liter: Outside: Length: 21.5? Depth: 12.5? Height: 13.25? Inside: Length: 17? Depth: 8.75? Height: 10.25? 38 Liter: Outside: Length: 24? Depth: 13? Height: 14.75? Inside: Length 19? Depth: 9.5? Height: 11.5?
$53.55 $63.00 15% Savings
The Badfish Re-Leash is an elastic surf leash that connects the paddler to the board and terminates at a quickdraw. Release and Re-Leash. The Re-Lease was originally designed for river running and river surfing, but is also an excellent lowdrag leash for all types of stand up paddleboarding. Features: Link between leash and quickdraw is a snap shackle release device that is activated with a tug on a small canopy ball Can be attached to a PFD strap, or anything near either of your hands by the carabineer, allowing for quick detachment of the leash when under load No more long reaches to your ankle strap when you need to get away from your board quickly
$179.99 $214.95 16% Savings
The MPG318 is a three boat self-standing boat storage rack. Comes complete with frame, hardware, J-Style Holders and lower frame kayak blocks. Built with powder coated high load steel, this package is easy to assemble and will last for years. DEMO: These racks are in excellent condition and have only been used for promotional and display purposes.
The MPG907 Axis Truck Bed Extender is made of heavy-duty steel with a thick powder coat to resist corrosion. It can be used in either the vertical position to create a rear of vehicle load bar or the horizontal position to extend the bed of a truck. The Axis fits 2" Class 2 receivers and has multiple settings for both height and width. Includes Lifetime Warranty. Features: -Eight height settings (56" - 63") -Ten width settings (32"- 48") -Integrated side arm load containment -2" receiver with hitch pin -Anti-wobble bracket -Powder coat finish -Lifetime Warranty Specifications: -Length: 56-63" -Width: 32-48" -Weight: 33 lb -Load Capacity: 500 lb What’s In The Box: (2) Left and Right Side Arms (1) Receiver Hitch Mast (1) T- Cross Bar (1) Center Mast (1) Receiver Hitch Pin (1) Anti-Wobble bracket (1) Hardware Kit (1) Instruction Manual
The J-Pro is a traditionally designed J-Cradle kayak carrier built to handle most sit-inside and sit-on-top kayaks. The J-Pro is Malones most affordable yet well built carrier with multiple layers of corrosion resistant coating, padded frames, universal fit mounting hardware and Lifetime Warranty for guaranteed satisfaction. Note: The base of the carrier has a rectangular "cutout" that has been included for square cross bar fit. This "cutout" does not effect the fit or function of the carriers when installed to round or oval shaped cross bars. Note: All Malone carriers come with two lengths of installation hardware (hex bolts). Cross bars can vary in thickness and having two lengths to choose from allows the consumer to select the best fit for their application. We recommend that the unused set of hardware be retained for future use with a different vehicle or cross bars. Features: -Adjustable rear foam pads to protect the boat's finish -Jawz universal mounting hardware fits nearly all racks -Synthetic base pads provide additional protection -Black coated corrosion resistant finish -11' load straps and safety tie-downs -Assembled and packaged in the USA -Lifetime Warranty -16" x 6" x 16.5" high Specifications: Weight: 11.5 lb Length: 16" Width: 6" Height: 16.5" Load capacity: 75 lb What’s In The Box: (2) J-Pro Kayak Carriers (2) Jawz Kits with Mounting Hardware (2) Cam buckle Load Straps (2) Bow and Stern Safety Tie-down Lines (1) Instruction Manual
Page 1 of 1