Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

Jagwire Shift Inner Wire, Slick, Stainless
$4.99 - $10.99
Jagwire's Shift Inner Wire is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
Ritchey Quick Disconnect
$12.95
• Break-Away Quick Disconnect • Time saving system for managing brake cables on Break-Away bikes • Light threaded alloy barrels with rubber noise dampener • Available for both derailleur and brake cables • Brake Quick Disconnect sold individually • Derailleur Quick Disconnect sold in pairs
Jagwire Open End Caps for Shift Housing
$29.99 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
SRAM Line/Housing Frame Protector Rubber
$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
Jagwire Hooded Shift End Caps
$59.99
Jagwire's Hooded Shift End Caps fit over the ends of your shift cable housing sections to protect them and keep the cables and shifting operating smoothly. These quality aluminum cable housing ferrules are "hooded" (the little tip on the end) to help prevent dirt and moisture from getting inside the cable housing. You get a bottle of 30.
Sunlite Galvanized Brake Cable
$2.79
• MTB or Road • 1.5 x 1855mm • Galvanized
Sunlite Slick Brake Cable w/Housing
$4.99
• Galvanized steel inner wire • PTFE lined brake housing • Front or Rear • Mountain or road
Sunlite Straddle Cable
$3.29
• Fits cantilever brakes • Sold individually
Sunlite Premium SLR Lined Housing
$47.49
- Use: Brake - Length: 30mm - Diameter: 5mm
Odyssey M2 Brake Cable
$5.99
Compatible cable for M2 Monolever.
Sunlite Three-Speed Cable
$5.99
- Complete cable kits for internal three speed hubs
BOX Nano Cable
$9.95
- brake or gear inner wire with PTFE coating for reduced friction
Jagwire 5mm Anchor Bolt
$9.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
Jagwire Alloy Straddle Cable Carrier w/Liner
$12.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
Jagwire EZ Handle Single End Straddle Wire, 1.8 x 330mm
$8.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
Jagwire Universal Sport Shift Cable Kit
$21.99
Jagwire's Universal Sport Shift Kits are the perfect way to enhancing shifting performance and precision and add style to your bike, too. Compatible with Shimano, SRAM, and Campagnolo systems, the slick stainless cables provide smooth, precise shifts, excellent durability and corrosion resistance. And with the housing and all the needed parts included, these kits are easy to install and ready to deliver years of flawless gear changing.
Origin8 Clamp-On Single Cable Stop
$7.99 - $14.99
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Odyssey Race Linear Kable
$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
Origin8 Rear-Mount Brake Cable Hanger
$10.99
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. • Forged aluminum construction • Mounts to most frame mounting holes • Great for tricky cantilever brake setups • Lightweight design
Origin8 Pro Pulley Cable Guide
$10.99
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
Sunlite Housing Ferrules
$0.39
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Origin8 Brake Cable Hanger (1-inch)
$10.99
Origin-8's Threadless Fork Cable Hanger provides a clean and functional way to route the front brake cable on your ride. It provides a 34mm cable stop drop down and a barrel adjuster so that you can adjust your stopping to perfection. • Fits 1-inch threadless fork steer tubes • Includes barrel adjuster • 34mm cable stop drop down • Anodized finish
SRAM Brake And Derailleur Casing
$43.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
Jagwire Sport Slick Galvanized Mountain Brake Cable
$4.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation
Jagwire Cable Grips
$10.99 - $12.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
Sunlite SIS 5mm Cable Housing
$32.49
• Multi-strand construction • Length: 25 feet • Size: 5mm
Jagwire Frame-Mount Adjusting Barrels
$8.99
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.
SRAM SlickWire Shift Cable Kit 4mm
$38.00
SRAM's SlickWire Shift Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get 2 excellent stainless-steel cables, slippery lined 4mm-diameter housings and aluminum ferrules and frame protectors.
SRAM SlickWire Road Brake Cable Kit 5mm
$40.00
SRAM's SlickWire Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules and frame protectors.
SRAM Ferrule Kit Aluminum 4mm & 5mm
$21.00
SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.
Page 1 of 7 Next page