Rim material
Carbon Fiber
Internal rim width
30 mm
Rim depth
50 mm
External rim width
38 mm
Tubeless compatibility
Yes
Wheel size (700c)
700c (29″; 622 mm bead seat diameter)
Wheel size (32-inch)
32″ (686 mm bead seat diameter)
Rim ERD (700c)
541 mm
Rim ERD (32-inch)
607 mm
Rim weight (700c)
420 grams
Rim weight (32-inch)
540 grams
Angle matched spoke holes
Yes
Hole count
24 holes front and rear
Brake compatibility
Disc (Centerlock)
Front hub type
Berd Talon ESL-R
Front hub dimensions
12 x 100 mm or 12 x 110 mm (both convertible to 15 mm)
Front hub weight (700c)
108 g
Front hub weight (32-inch)
106 g
Rear hub type
Berd Talon ESL-R
Rear hub dimensions
12 x 142 mm or 12 x 148 mm
Rear hub weight (700c)
205 g
Rear hub weight (32-inch)
208 g
Freehub compatibility
SRAM XD, Shimano Microspline, Shimano Hyperglide, or Campy N3W
Freehub material
TriCoat™ Aluminum
Freehub mechanism
High engagement 36 tooth ratchet
Hub manufacturer
Berd
Brake type
Centerlock
Front hub bearings
2 x 6803 bearings (17 x 26 x 5 mm)
Rear hub bearings
2 x 15267 bearings (15 x 26 x 7 mm), 2 x 6802 bearings (15 x 24 x 5 mm)
Front spokes (700c)
Berd PolyLight Spokes, 259 mm
Rear spokes (700c)
Berd PolyLight Spokes, 259 mm
Front spokes (32-inch)
Berd PolyLight Spokes, 290 mm
Rear spokes (32-inch)
Berd PolyLight Spokes, 290 mm
Lacing pattern
Two-cross front and rear
Tubeless ready
Rim tape and valves installed
Tire type
Tubeless, tube type clincher
Tire compatibility
40 mm - 60 mm (1.50″ to 2.35″)
Measured tire width - Schwalbe G-One RS Pro 700 x 45 mm
45.6 mm
Measured tire width - Schwalbe G-One RS Pro 700 x 50 mm
50.9 mm
Measured tire width - Schwalbe G-One RS Pro 700 x 55 mm
55.7 mm
Measured tire width - Continental Dubnital Rapid Race 29 x 2.2
55.3 mm
Maximum tire pressure
60 psi (4.14 bar)
Wheelset weight (700c)
1,298 grams (without rim tape and valves)
Front wheel weight (700c)
600 grams (without rim tape and valves)
Rear wheel weight (700c)
698 grams (without rim tape and valves)
Wheelset weight (32-inch)
1,541 grams (without rim tape and valves)
Front wheel weight (32-inch)
718 grams (without rim tape and valves)
Rear wheel weight (32-inch)
823 grams (without rim tape and valves)
Intended use
Gravel racing and riding
E-bike approved
Yes, up to 60 Nm/500 W
Weight limit
280 lbs / 127 kg
Assembly method
Hand laced in Hopkins, MN, trued by TRUDI
Freehub maintenance
Greasing the internal ratchet mechanism is recommended every 3,000 km
End cap grease
Waterproof lithium complex grease is pre-applied to the exterior bearing surfaces; inspect after washing, wet or muddy rides, or every 3,000 km, whichever comes first
Bearing maintenance
Inspect bearings every 3,000 km
Hooked bead width
4 mm
Wind tunnel optimized tire range
45 mm to 55 mm
Rolling efficiency savings
5 watts at 30 km/hr, independently measured by John Karrasch
Berd spoke weight
2.4 grams each